The gold standard

of hygienic food
equipment design

Search
Menu
Home
>
knowledge center
>
Document Library

Document Library

Browse all documents pertaining to 3-A SSI's work as a standards body.

Document Type

CATEGORY

Reset
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

AUTHORIZATION AGREEMENT FOR USE OF THE 3-A SYMBOL AND REPLACEMENT PARTS AND SYSTEM COMPONENT QUALIFICATION MARK

Evaluator (CCE) Information & Bulletins

This Authorization Agreement is entered into by and between 3-A Sanitary Standards, Inc. and the Applicant.

Download file

Guidance Document for the Development of 3-A Sanitary Standards and Accepted Practices With Examples of Text for Criteria

Standards Interpretations

This guidance document provides a framework for the development of equipment-specific “B Level” 3-A Sanitary Standards or 3-A Accepted Practices and describes the sanitary concepts found in a 3-A Sanitary Standard or Accepted Practice. 3-A Sanitary Standards or 3-A Accepted Practices do not cover machine safety, cost, efficiency, or any other non-sanitary considerations.

Download file

2024 Annual Report

Annual Reports

This 2024 annual report covers 3-A's operations during 2023.

Download file

Request For Interpretation of 3-A Sanitary Standards or 3-A Accepted Practices Criteria

Standards Interpretations

Request For Interpretation of 3-A Sanitary Standards or 3-A Accepted Practices Criteria

Download file

Report of Alleged Nonconformance to a 3-A Sanitary Standard (RAN) Form

Resource Papers

The Report of Alleged Nonconformance (RAN) pertains only to equipment that displays a current 3-A Symbol authorization.  If you believe equipment in use in the dairy and food industry that displays the 3-A Symbol does not conform to a 3-A Sanitary Standard, report such equipment to 3-A Sanitary Standards, Inc. (3-A SSI).  The report must be submitted in writing using this form.

Download file

Regulatory Perspective on Verification Activities and Corrective Actions to Ensure the Effectiveness of Controls at Preventing Foodborne Illness

Annual Meeting Presentations

FDA has been compiling information on primary causes of foodborne illness outbreaks and recalls with processing equipment design, operation and maintenance falling into the “Top 10” category. Dr. Warren will be share overall information on this as well as sample case studies. In addition, he will describe the role of outside dairy and standards organizations such as 3-A SSI and the National Conference on Interstate Milk Shipments (NCIMS Grade A program) with FDA. Dr. Warren will be address the current status and future direction of FDA and its potential impact on 3-A SSI.

Download file

Dairy Equipment Fabrication Shortcomings & Challenges

Annual Meeting Presentations

Dan Erickson has been traveling the world evaluating dairy equipment and dairy plant and packaging operations outside of the US for almost 20 years and will share his experience and the perspectives of specific dairy equipment hygienic design failures including the “whys”, “hows” and lessons to be learned.

Download file

Hygienic Design’s Impact on the Dairy Processing Industry

Annual Meeting Presentations

Drawing upon years of experience as a state dairy farm and plant processing specialist and food safety and regulatory manager in the US dairy industry, Ms. Piotter will share her experiences on specific processing equipment hygienic design failures, its impact on dairy facility operations, products and lessons learned including tips of what to look for when evaluating dairy processing equipment.

Download file

Hygienic Design Perspectives in the Meat Processing Industry

Annual Meeting Presentations

As both a 3-A Certified Conformance Evaluator (CCE) and USDA AMS Meat and Poultry Equipment Review program evaluator, Mr. Glick will illustrate the key differences between hygienic design requirements for the dairy equipment inspection program and the USDA AMS meat equipment evaluation and certification program.  In addition, he will share specific experiences in evaluating meat equipment, common shortcomings and why meat equipment meeting the USDA AMS “Guidelines for the Evaluation and Certification of the Sanitary Design and Fabrication of Meat and Poultry Processing Equipment - February 2009” still require periodic “deep cleaning”.

Download file

Hygienic Design for Produce Processing

Annual Meeting Presentations

Hygienic design challenges exist across the food industry and the produce industry is not immune to these challenges. Design challenges begin in the field and continue through the process at the plant. This presentation will focus on the current state of design in the process and how to increase food safety with improvements in design. Discussion will include thinking holistically about design and applying hygienic design principles to equipment, infrastructure and plant layout. With this approach the produce industry has the opportunity to maximize the benefits of hygienic design, resulting in wins in food safety and productivity.

Download file
|
PH 703.790.0295   |   FX 703.761.6284
|